Area of application: FB14 Quick RotFix can be used on floors and walls in dry and wet areas when gluing tiles, clinker and granite ceramics. Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings.
\nSuitable for heated floors. Very good adhesion and rapid strength development.<\/p>\n
The substrate: The
\nsubstrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed.
\nSuction pads should be primed with FB 5 Primer.
\nNOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.<\/p>\n
Amount of water:
\n15 kg of powder is mixed with 3.9-4.5 liters of cold clean water.<\/p>\n
Technical data:
\nClass according to EN 12004: C2FT S1
\nFire resistance: A1
\nOpen time: approx. 30 minutes
\nProcessable: 20 minutes
\nCan be joined on the floor at 20 \u00b0 C: 1-2 hours
\nCured: 30 hours Working temperature
\n: 10-25 \u00b0 C
\nUnderfloor heating: Yes
\nMaterial consumption:
\n6 mm tooth putty: approx. 2.5 kg \/ m2
\n8 mm tooth putty: approx. 3.5 kg \/ m2
\nMax consumption: 4.5 kg \/ m2<\/p>\n","protected":false},"excerpt":{"rendered":"
Cement-based adhesive – Art. No. 1696-0038 15 kg<\/p>\n","protected":false},"featured_media":3012,"comment_status":"closed","ping_status":"open","template":"","meta":[],"product_brand":[],"product_cat":[165],"product_tag":[],"class_list":{"0":"post-3051","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-adhesives","8":"first","9":"instock","10":"product-type-simple"},"yoast_head":"\n