Area of \u200b\u200bapplication:
\nCan be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
\nCan be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings. Suitable for heated floors.
\nVery good adhesion, fast strength development, long assembly time and has a good hanging ability.<\/p>\n
The substrate: The
\nsubstrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed. Suction pads should be primed with FB5 Primer.
\nNOTE According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.<\/p>\n
Amount of water:
\n12 kg of powder is mixed with 4.8-5.0 liters of cold pure water.<\/p>\n
Technical data:
\nClass according to EN 12004: C2TE S1
\nFire resistance: A1
\nOpen time: approx. 5 hours
\nProcessable: 30 minutes
\nCan be joined on the floor at 20 \u00b0 C: 10-18 hours
\nCured: 7 days Working temperature
\n: 10-25 \u00b0 C
\nUnderfloor heating: Yes
\nMaterial consumption:
\n6 mm tooth putty: approx. 1.6 kg \/ m2
\n8 mm tooth putty: approx. 2.2 kg \/ m2
\nMaximum consumption: 4 kg \/ m2<\/p>\n","protected":false},"excerpt":{"rendered":"
Dust-reduced white cement-based adhesive – Art. No. 1691-0037 12 kg<\/p>\n","protected":false},"featured_media":3027,"comment_status":"closed","ping_status":"open","template":"","meta":[],"product_brand":[],"product_cat":[165],"product_tag":[],"class_list":{"0":"post-3056","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-adhesives","8":"first","9":"instock","10":"product-type-simple"},"yoast_head":"\n